◇ Introduction ◇ Function◇ Parameter◇ Product order◇ Download◇ Related products

DTY2016 automatic pressure calibration station

Technical parameters

♦ Pressure building range: (-0.1 ～ 0) MPa air (0 ～ 6) MPa air (0 ～ 70) MPa oil

♦ Three output connector:connect external standard pressure module, and connect 2 pieces of inspected table at the same time;

♦ Two-way current measurement: (0 ～ 25) mA accuracy: 0.02% R.D + 0.005% F.S

♦ Two-way voltage measurement: (0 ～ 25) V accuracy: 0.02% R.D + 0.005% F.S (when the medium is oil or water)

♦ Two-way voltage measurement: (0 ～ 50) V accuracy: 0.02% R.D + 0.005% F.S (when the medium is vacuum or air)

♦ DC 24V power supply: It can be used to supply power to multiple pressure transmitters simultaneously (load ≤500mA)

♦ Switch measurement: automatic measurement of pressure switch on and off

♦ Display resolution: current, voltage 6 bits, pressure 5 bits

♦ Pressure accuracy level: 0.05% F.S Pressure control fluctuation rate: 0.01% F.S Last digit ± 1 character

♦ Power supply: AC220V + 10% / 50Hz